精锐系列:定制配机器人油压切边机

精锐系列:定制配机器人油压切边机
Elite series:Customized hydraulic press cooperating with robot
使用欧姆龙品牌PLC控制并带有相同品牌的触摸屏,符合人机工程学要求,操作方便。
触屏显示设备报警,状态,参数,并根据报警内容提示故障原因。
具备产品有无检测功能,防止压坏,撞伤产品或设备,防止产品变形,防止产品掉落。
液压驱动,带有数字显示功能。
具有爬梯及维修平台,并具有安全保护装置。
液压站预留四组阀,预留油缸,信号模块安装位置,用以具备扩展功能。
工作台面上配有落料槽及吹气装置,有效清理废料残渣,提高生产效率。
Å We choose Omron’s PLC and HMI, whichconforms to Ergonomics.And it is pretty easy and convenient for workers to operate the machine.
Å Various functional parameters, real-time conditions and equipment alarms are displayed on the HMI.What’s more, causes of equipment alarms are enumerated on the alarm page of the HMI. It is very convenient for equipment technicians to maintain the equipment.
ÅThis machine has the function of judging whether the product is laid stably or notby robot, in order to prevent from damaging the products and the machine itself.
ÅThis machine is hydraulic drive. Omron’s control system realizes real-time monitoring pressure and flow and pushing accurate data on the HMI.
ÅThis machine has a safe ladder, so that equipment technicians can have easy access to the top of the machine for checking the problems. This machine is equipped with many other safety devices.
ÅThis machine has very good expansion performance. Hydraulic station has four groups of valves for preparation, if clients need ejections and core pulling on the mold.A hydraulic cylinder is also prepared, including the position where signal module can be installed.
ÅThe workbench is equipped with dropping grooves and blowing devices, so as to clear dross effectively and improve the productivity.
Main Parameters Unit Value
Clamping force of punching cylinder T 10
Opening force of punching cylinder T 4.8
Stroke of punching cylinder mm 700
Distance between four columns (L*W) mm 1100*650
Minimum mold thickness mm 0
Maximum mold openingdistance mm 1480
Clamping force of compression cylinder T 10
Opening force of compression cylinder T 4.8
Stroke of compression cylinder mm 650
Hydraulic system pressure Kgf/cm3 140
Servo motor power Kw(hp) 7.5(10)
Machine weight T 4.2
Outline dimension of main machine(L*W*H) mm 1600*1300*3700
  单位 >SD4-10H >SD4-15H >SD4-20H >SD4-30H >SD4-40H >SD4-50H >SD4-60H SD4-80H >SD4-100H >SD4-140H
合模力
Claping Force
T >10 >15 >20 >30 >40 >50 >60 80 >100 >140
开模力
Opening force
T >4.8 >6 >5.7 >7.8 >8.1 >8.4 >8.8 10 >12.5 >20
模柱间距
Distance Between Tie Bars
mm >540*340 >600*400 >650*450 >725*525 >800*575 >850*640 >900*720 1000*800 >1100*900 >1300*1000
最小模厚
Min Moid Thickness(B)
mm >150 >200 >200 >250 >250 >250 >300 300 >300 >350
开模行程
Claping Stroke
mm >350 >350 >400 >450 >450 >500 >500 500 >500 >650
最大开模间距
Max Opening(B)
mm >500 >550 >600 >700 >700 >750 >800 800 >800 >950
落料口
Falling Size
mm >250*200 >250*200 >300*200 >300*250 >300*250 >300*250 >300*250 350*250 >350*250 >350*300
最大油压力
Max.Hydraulic preesure
Kg/cm² >140 >140 >140 >140 >140 >140 >140 140 >140 >140
油泵电机
Pump Motor Power
Kw(HP) >3.7(5) >5.5(7.5) >7.5(10) >7.5(10) >7.5(10) >11(15) >11(15) 11(15) >15(20) >15(20)
总用电量
Total Wattage
KW >3.7 >5.5 >7.5 >7.5 >7.5 >11 >11 11 >15 >15
机器重量
Machine Weight
T >1.5 >1.8 >2.8 >3.2 >4.2 >4.3 >4.8 5.5 >6.8 >8.5
机器外型尺寸
Machine Dimensions
m >1.2*1.4*2.1 >1.3*1.0*2.2 >1.4*1.6*2.4 >1.4*1.7*2.7 >1.6*1.4*2.8 >2.0*1.9*3.1 >1.8*1.6*3.0 1.9*1.7*3.3 >2.0*1.8*3.7 >2.6*2.5*4.0
  • 在线留言
  • 标题名称:
  • 内容:
  • 联系人:
  • 电子邮件:
  • 电话:
  •  
  •  

产品展示

联系方式

名称 苏州轩研机械制造有限公司
地址 苏州市甪直镇长虹南路6号
联系人 王先生
手机 15050377716
电话 0512-66020051
传真 0512-65022450
邮箱 szxuanyan@aliyun.com